MiniBrew 15 Gallon Conical Fermenter

MiniBrew Conical FermenterThermometer

MiniBrew Conical FermenterThermometer

Ref: 58607

In stock

Price: 34.92 (Incl. VAT)

Select Quantity:  


This is our fermentation scale thermometer: The scale reads from 0º/55º C - 30º/130º F.
The thermometer is back connected with 1/2" threads. The stem is 4" with an anti-glare Face and a calibration nut on the back. The body is stainless steel.

PLEASE NOTE SIZES QUOTED ARE USA SIZES AND MEASUREMENTS

This is deisgned to screw into the minibrew fermenters, it has no nut or washer
Delivery on Average take 2-3 Working Days
(sometimes longer During busy times)

For UK
Mainland UK, Order weight Under 1kg = 3.12
Mainland UK, order value Over 65 = FREE DELIVERY
Mainland UK, order value Under 65, But order weight Over 1kg = 6.50

Saturday delivery to mainland UK 25.50 (must have the order by, 2pm Friday)
Some postcodes we can't send on Saturday Delivery like AB 51

For Northern Ireland ( BT Post codes)
Northern Ireland order weight Under 1kg = 3.12
Northern Ireland order weight 1kg - 29kg = 9.00
Northern Ireland order weight 30kg - 59 kg = 18
Northern Ireland order weight 60kg - 89 kg = 27

Channel Islands - Jersey and Guernsey
Under packed order weight 1kg = 2.60 ( No Vat)
Order weight is 1kg - 25kg = 18.00 ( No Vat), 2 day service
order weight is 25.01kg - 50kg = 36.00 ( No Vat), 2 day service
order weight is 50.01kg - 75kg = 54.00 ( No Vat), 2 day service
FOR EU ORDERS ( AS BELOW )

For more Information please see Delivery Info at the top of the site


People Who Bought This Item Also Bought

Brewing Sugar 1kg

Brewing Sugar 1kg

2.00

MiniBrew 15us Gallon Conical Fermenter (12.49 uk gallons)

MiniBrew 15us Gallon Conical Fermenter (12.49 uk gallons)

360.00

Goldings Hops 100g

Goldings Hops 100g

3.36

Youngs Steriliser 500g

Youngs Steriliser 500g

5.16

Go Back

MiniBrew 15us Gallon Conical Fermenter (12.49 uk gallons)
MiniBrew 15us Gallon Conical Fermenter (12.49 uk gallons)

MiniBrew 15us Gallon Conical Fermenter (12.49 uk gallons)

Ref: 20155.

In stock

Price: 360.00 (Incl. VAT)

Select Quantity:  


For instructions and care click here
While the f15 fermenter is not new the gasket and how it fits on the tank is new. We call the new fermenter the f15b. It is designed for our new blue gasket. See the gasket page for more details about the gasket. This new design is easier to install and therefore it is easier to use. We still believe a gasket is not needed but you have asked for a better design and we complied with your wishes. The fermenter ships ready to brew and is our best design for 10us gallon recipes (8.326 uk gallons). Included are a 1" nickel plated bottom ball valve, 1/2" nickel plated racking port ball valve, lid, stand plus three 1/2" screw in plugs. There are two threads in the lid and one below the label for a thermometer. The thermometer is not included. The plastic is a full 5/16" thick. The fermenter is 44 1/2" tall x 18 3/4" wide.
Easy to Clean and Sterilize All popular cleaning and/or sterilizing agents can be used on our plastic (HDPE) fermenters. They will not harm the inert plastic material. Water at 180 F degrees is an excellent sterilizing agent; pour it down the sides of the fermenter. The heat will sink into the plastic and all the parts, killing bacteria. This procedure works with stainless also. The large top makes it easy to get inside and scrub dried trub with a Teflon scouring pad. The melting point of plastic is 250 F degrees.

No Scratches Worries One need not worry about tiny scratches in plastic or stainless. There are two answers to the problem and both are easy. The first is to do nothing. Sterilize with hot water. The second is to remove the scratch by cutting down the sides with a dull knife. Draw the blade toward you, scraping away the plastic. Grinding and buffing scratches in stainless steel is more complicated.

No Secondary Transfers No need to transfer wort or wine to a secondary fermentation vessel. It is safer and less work to transfer the lees and dead yeast cells from the bottom while you leave the fermenting process above untouched.

Fermenter Design and Shape The precise shape of the 60 degree cone and top cylinder (one unit wide by one unit high+) are fermenter design perfections developed over the years by dedicated brewers looking to improve taste, consistency and ease of use. The shape positions the yeast and convection does the rest. The mixing motion of the currents assures complete yeast wort contact. The yeast near the cool sides will sink and, upon hitting the conical bottom, is forced into the center where it is warmer. Active yeast tends to give off heat. The hard working warmer cells rise to the top and spread to the sides to complete the cycle. Dead yeast cells will drop to the bottom and are removed quickly and easily (about 30% are alive) for disposal or reuse.

Precise Temperature Monitoring Thermometer threads on the MiniBrew System brand of fermenters are located near the middle of the wort for precise temperature monitoring. A screw-in plug is included. Thermometer sold
separately
Valves included The 1/2" racking port threads are located on the side cone just above the settled yeast level. The port valve is for sampling, specific gravity reading and, of course, racking to bottles and kegs. The valve at the apex of the cone is for filling the fermenter and draining dead yeast. The thickest of yeast will flow through this large valve.

ALL THIS without lifting a carboy, siphoning risk or breaking glass. Now small batch brewing is easy and professional. Carboys, plastic buckets, converted kegs and stainless are history. They just do not provide the benefits, flexibility, ease of use and low cost.

PLEASE NOTE SIZES QUOTED ARE USA SIZES AND MEASUREMENTS
Delivery on Average take 2-3 Working Days
(sometimes longer During busy times)

For UK
Mainland UK, Order weight Under 1kg = 3.12
Mainland UK, order value Over 65 = FREE DELIVERY
Mainland UK, order value Under 65, But order weight Over 1kg = 6.50

Saturday delivery to mainland UK 25.50 (must have the order by, 2pm Friday)
Some postcodes we can't send on Saturday Delivery like AB 51

For Northern Ireland ( BT Post codes)
Northern Ireland order weight Under 1kg = 3.12
Northern Ireland order weight 1kg - 29kg = 9.00
Northern Ireland order weight 30kg - 59 kg = 18
Northern Ireland order weight 60kg - 89 kg = 27

Channel Islands - Jersey and Guernsey
Under packed order weight 1kg = 2.60 ( No Vat)
Order weight is 1kg - 25kg = 18.00 ( No Vat), 2 day service
order weight is 25.01kg - 50kg = 36.00 ( No Vat), 2 day service
order weight is 50.01kg - 75kg = 54.00 ( No Vat), 2 day service
FOR EU ORDERS ( AS BELOW )

For more Information please see Delivery Info at the top of the site


People Who Bought This Item Also Bought

MiniBrew Conical FermenterThermometer

MiniBrew Conical FermenterThermometer

34.92

MiniBrew 15us Gallon Gasket

MiniBrew 15us Gallon Gasket

30.24

  

Go Back

The Home Brew Shop Information Zone