FermZilla Tri-Conical 27 Litre Fermenter
FermZilla Tri-Conical fermenter. With a 600mL Collection container with a 3 Inch Tri-clover connection, the gold standard for sanitary design and effortless removal.
No more complicated dump valve designs here, just simplicity. Brew with confidence on the new Tri-Clover FermZilla Range.
The FermZilla is a revolution in home brewing allowing home brewers and small micro-breweries a level of control that meets everyone's budget. With the FermZilla you have many of the benefits of a much more expensive stainless conical fermenter but with the additional benefit of being able to see the fermentation process in action and also ferment at pressures up to 2.4bar.
This is an incredible product at an extremely attractive price point in all the different sizes and models.
YES, It is by far the easiest Conical PET fermenter to disassemble and clean into all the nooks and crannies. Simply release all pressure inside the vessel and detach the tri clover clamps.
Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof before you fill the fermenter every time. To do this. Fill your FermZilla up with some water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads by tipping it upside down, in all directions where there are risks of leakage.
Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET.
Do not expose to temperatures exceeding 35°C and pressure ferment past 5psi at these temperatures.
What does the starter kit come with?
- 1 x 27L Conical FermZilla Tri-Conical Base Kit (Unassembled)
- 1 x 27L Tri-Conical Tank with metal neck ring
- 1 x Standard Top Lid, with Red PRV (35psi) [2 x Male Cap Threads] [Up to 4 drill ports for accessories]
- 1 x Collar Lid Ring
- 1 x Grommet Black Cap + 1 x Blank Black Cap for lid
- 1 x Premium 3 Piece Airlock
- 1 x 3 inch tri clover to 3 inch tri clover Butterfly Valve
- 1 x 600mL Collection Container & Lid* [2 x Male Cap Threads]
- 2 x Blank Black Cap
- 1 x 3 piece ~ 3 inch tri clover clamp [+ 1 x 3" Beaded Silicone Seal]
- 1 x 2 piece ~ 2 inch tri clover clamp [+ 1 x 2" Beaded Silicone Seal]
- 1 x Stainless Stand with swing handles 1 x Stainless Steel Handle Assembly
- 1 x Strip Stick On Thermometer
- 1 x Level indicator sticker (Litres and Gallons
- 1 x Spare Lid O-Ring
- 1 x Spare Collection Container O-Ring
Specifications:
- Hight: 750mm (856mm with airlock)
- Width: 352mm
- Capacity: 27L
- Weight: 5.3kg
- Materials: Plastic Fermenter
All dimensions are approximate and subject to minor variation.
