5 Gallon Plastic Beer Barrel - S30 Valve
A dependable and cost-effective solution for storing and dispensing homebrewed beer or cider—ideal for both beginners and experienced brewers.
• Capacity: 25 litres / approx. 5 gallons / 40 pints
• Material: Food-grade white plastic with durable construction
• Cap: 2" screw cap fitted with a brass S30 valve
• Compatible with: Refillable S30 CO₂ cylinders
• Tap: Gravity-fed bottom tap for easy serving - Tap design may vary depending on availability
• Enables secondary fermentation and pressure retention for natural carbonation
• S30 valve allows for CO₂ injection using refillable S30 cylinders
• Lightweight and shatter-resistant—ideal for parties, storage, and transport
• Economical alternative to bottling with reduced cleaning and sanitising effort
Important: Designed exclusively for the refillable S30 CO₂ injection system. CO₂ bulbs are incompatible with this barrel valve
Note: No CO₂ is included with this barrel
Height ( excluding Cap ):- 42cm approx.
Width:- 30 cm approx.
Always check tap is tightened before use
Note: To ensure a proper seal, it's essential to apply a thin layer of petroleum jelly (Vaseline) around the lid’s O-ring. Hand-tightening alone is often insufficient—using a cap spanner to give an extra quarter turn can significantly improve the seal and prevent gas leaks.
Occasionally, manufacturing inconsistencies can leave small bumps or uneven areas on the rim of the barrel. Lightly sanding the top surface with wet-and-dry sandpaper on a flat board can help level it out, improving the lid’s contact and sealing performance.
IMPORTANT: After filling the barrel, always check for pressure within the first hour. Open the tap briefly - if pressure is present, all is well. If not, re-tighten the lid, apply a thin layer of petroleum jelly to the seal, and test again.
Don’t leave this step for several weeks, as lack of pressure could result in a spoiled brew.
