Beer Keg 12 litres Starter Kit
All the Cornelius fittings can be used on these beer kegs these use Ball Lock Fittings The lids are larger then the Cornelius kegs
These are Brand new but to the nature of stainless steel manufacturing there may be marks on the kegs
Made from 304 Stainless Steel
Height Including Handles 40 cm approx.
Width 23 cm approx.
Made in China
Max pressure is 60 psi Comes with:
Regulator
Picnic Tap
Tubing
These kegs Seal from the inside so you will need Pressure in the kegs i.e. co2 to seal the kegs
You cannot use a secondary fermentation to seal the kegs as not enough gas is produced to make a good seal.
You still can secondary ferment in the kegs, however you will need to use some co2 to seal the kegs initially