Brew Built® X2 Uni Conical Fermenter 26 Litres 

(5.5 Gallons) Approximately

Comes With:

• Flex Chamber CONP711
• X1 Uni Pressure Pack CONP720
• X2 jacketed - Neoprene Coat CONP474

What sets the BrewBuilt X2 Conical Fermenter apart:

• Highest quality mirror finish.
• Welded, ground and polished interior welds are the very highest quality and the ultimate for sanitation.
• Four crossbar reinforced legs are superior for stability, mimicking Pro Uni Tanks.
• Horizontal ports on the cone, just like pro tanks, allowing your racking arm, carbstone, and thermometer to have a horizontal placement in your tank. This allows for smaller minimum batch sizes, better carbonation, and more.  
• Pressure Relief Valve with pull ring built into the lid.
• 2" oversized bottom port and Butterfly Valve.
• Coolest accessory upgrades like Pressure Pack with Floating Dip Tube, clear Flex Chamber trub collector, Coolstix, Kit for Pressure Fermentation etc. 

The BrewBuilt X2 Uni Conical was born of thousands of hours of research, contemplation, and development. The engineers and critical minds behind its realization scoured years of feedback from home and professional brewers alike to determine the ideal feature set of a stainless steel conical fermenter. And where standard features fell short, we pushed the boundaries into new territory never before seen on a premium conical fermenter. The end result is a unit purpose-built to advance your fermentation process, improve the quality of your finished beer.

We guarantee that you will love the fit and finish of the X2 Uni Conical. Made entirely of 304 stainless steel, the quality exceeds what has previously been done in brewing applications and approaches the level of pharmaceutical-grade finish. With flawless welds and a dazzling mirror-polish finish inside and out, the BrewBuilt X2 Uni is easy to sanitize.

Extra Large 2” T.C. Dump Valve
Dry hop to your heart's desire. Try as they might, hopheads will have a hard time clogging this conical. With an oversized 2" bottom port, you’ll have all the clearance you need (and even more than some pro brewers) to drop out your dry hop additions with ease. The slick mirror-polish finish on the inside allows flocculating yeast to collect neatly at the bottom of the cone as they slide right down the smooth interior walls. The butterfly dump valve integrates perfectly with the optional Flex Chamber Trub Separator and Yeast Harvester.

Reinforced Four-Leg Foundation
There’s a common complaint seen in the feedback for other conical' s on the market—the tippiness of three-legged units. Three legs may be fine when the fermenter is sitting still on an even surface, but users are often forced to purchase a bracing shelf for more stability if they add casters or leg extensions. A conical is only as worthy as its foundation, so BrewBuilt modelled the X2 after professional-level brewery tanks with a four-leg, reinforced base. This seemingly small design feature is more expensive to produce, but it's what makes the X2 conical exceedingly stable when compared to other models.  When you fill up your fermenter with delicious fresh wort, you want to trust the vessel that’s holding your latest creation.  The four-leg, welded-bar reinforced system is absolutely rock solid. This is an especially critical feature if you plan to add rolling casters so can easily glide the fermenter around your brewery. 

The reinforced four-leg design not only increased the stability and strength of the conical, it also allowed the unit to stand taller, thereby eliminating the need for extensions in almost every situation. An elbow, a sight glass, or the Flex Chamber can be mounted under the unit with room to spare.

Adjustable Feet
The X2 Uni comes standard with reinforced thread-in adjustable feet. If your home brewery has uneven flooring, you can quickly and easily level out the fermenter. The feet can be swapped out with high-quality casters at any time.

Other Features You’ll Love:

• Downward-facing blow off tubing from kinking and is much easier to remove and clean than a fixed stainless blow off
• Internally etched volume markers in gallons and litres
• Stainless steel lid clamp with single-piece moulded silicone gasket
• In our X2 redesign we've added two more 1.5" T.C. ports to the cone and body for additional flexibility with current and upcoming product add-ons

X2 Uni Conical Features:

• 304 stainless steel construction
• Mirror polish finish
• Interior welds are the best in the business - uniquely ground and polished 
• (3) Horizontal welded cone ports
• (1) 4" TC Lid Opening
• (2) 1.5" TC Lid Openings
• 2" TC bottom dump with 2" TC butterfly valve
• 1.5" Thermowell for inserting thermal probe
• Strong welded in place handles 
• (4) Adjustable feet
• Silicone tube for blow off
• Stainless lid clamp & one piece moulded gasket
• Built-in 15 psi PRV (Not sufficient for fermentation - optional Pressure Fermentation Kit required for pressure fermentations)
• Internally etched volume markers

Specifications:

• Hight: 96.3cm
• Width: 38.9cm
• Capacity: 26L
• Weight: 17kg
• Materials: Stainless Steel (AISI 304)

All dimensions are approximate and subject to minor variation.