FermZilla 30L Flat Bottom Home Brew Starter Kit
FermZilla 30L Home Brew Starter Kit - What's in the box?
1. 1 x KL14755 30L FermZilla Flat Bottom Fermenter with 1x siphon (KL14083)
2. 1 x White Fermenter tap Bulkhead with 10mm barb
3. 1 x KL01595 Air Lock (Three-piece)
4. 1 x KL01618 Strip Stick On Thermometer
5. 1 x KL12607 Bottling Wand
6. 1 x KL07153 KegLand Beverage Tag
7. 4 x 50g Sachets of PET Cleaning Powder
8. 1 x KL04312 3 Scale Hydrometer
9. 1 x (100 pack) Gold Crown Seal Bottle Caps
10. 1 x KL12676 Handheld Twin Lever Bottle Capper
What we would also recommend that you get:
a) We recommend that you get glass bottles. You can just re-cycle some glass bottles from other beer you have drunk.
b) Carbonation drops or sugar to carbonate/prime your bottles.
SPECIAL NOTE:
This fermenter has not been pressure rated and it's not designed to ferment under pressure, pressure transfer or carbonate in.
FermZilla 30L Home Brew Starter Kit - WARNING: This fermenter is only rated to temperatures of 45C. Ensure to cool any liquid down to below this temperature before pouring in to the fermenter. If you need to dissolve extract syrup with boiling water, make sure to cover the syrup with sanitised foil or the sanitised lid of the can while cooling and cool down to below 45C in an ice bath for example.
5 Reasons to Get the FermZilla Flat Bottom is Superior to other HDPE and PP Fermenters
Super Smooth
The PET is super smooth making it easier to clean. Other HDPE fermenters have very porous wall meaning krausen sticks to the walls and the holes in HDPE are large enough for bacteria to grow in the wall of the fermenter.
Better Oxygen Barrier
Some fermenters like the Coopers type are not even airtight and have a loose-fitting lid allowing oxygen to get into the fermenter easily. Other fermenters are often made from HDPE that has high gas transmission rate meaning oxygen can pass through the wall of the fermenter
Lightweight and strong
The FermZilla fermenters are lightweight but really strong and shatterproof.
Convenient Lid Opening Size
The opening at the top is 120mm diameter so its easy to get your arm into clean but also small enough that it's easy to seal the lid with minimal force.
New Ergonomic Lid Design
The new lid design allows you to lift the vessel much easier than the previous metal versions. It has a silicone grommet pre-fitted into the lid to insert the 3 Piece Airlock.
