Want to make an enquiry? Call us on 01252 338045 or via sales@the-home-brew-shop.co.ukFree Delivery over £72.00 UK Mainland Skip to Content
Tap Kit, Ball Valves and Parts
-
![]()
IN STOCKWeldless Tap kit with Thermometer and Hop Strainer£42.00 £35.00 -
![]()
IN STOCKKevlar Washer 1/2" ID Diameter£0.66 £0.55 -
![]()
IN STOCKBrass Flanged Nut 1/2"£0.90 £0.75 -
![]()
IN STOCKStainless Steel 1/2" x 1/2" Barb£3.00 £2.50 -
![]()
IN STOCKStainless Steel 1/2" x 3/8" Barb£2.88 £2.40 -
![]()
IN STOCKStainless Steel Washer 7/8" ID£0.72 £0.60 -
![]()
IN STOCK -
![]()
IN STOCKBall Valve 2 piece Stainless Steel 316, 1/2"£11.40 £9.50 -
![]()
IN STOCK -
![]()
IN STOCK3 Piece Stainless Steel Ball Valve 1/2"£11.16 £9.30 -
![]()
IN STOCKEar Crimper£3.00 £2.50 -
![]()
IN STOCKBeer Faucet Shank Wrench for Homebrew Beer Tap£1.92 £1.60 -
![]()
IN STOCKEPDM Tri Clamp Gasket 2"£0.96 £0.80 -
![]()
IN STOCKEPDM Tri Clamp Gasket 1.5"£0.90 £0.75 -
![]()
IN STOCKTri Clamp Tee 1.5 Inch Stainless Steel£15.00 £12.50 -
![]()
IN STOCKWye Splitter for Homebrewing CO2 regulator£3.60 £3.00 -
![]()
IN STOCKMini Ball Valve 1/2" Male - 1/2" Female BSP£3.00 £2.50 -
![]()
IN STOCKStainless Steel 90 Degree Elbow - 1/2" BSP£1.80 £1.50 -
![]()
SOLD OUT -
![]()
IN STOCKTap Shank With Welded Nipple 4-5/8" inches£8.76 £7.30 -
![]()
IN STOCKTap Shank With Welded Nipple 6 inches£10.44 £8.70 -
![]()
IN STOCK -
![]()
IN STOCK -
![]()
IN STOCKStainless steel Female Quick Disconnect 1/2"£6.60 £5.50 -
![]()
SOLD OUT11 Litre Stock Pot 25x25cm£21.00 £17.50 -
![]()
IN STOCKBall Valve with 1/2" Barb and Rear Assembly£14.40 £12.00 -
![]()
IN STOCKInline-Thermometer with Quick Disconnects£18.00 £15.00 -
![]()
IN STOCKThree Way Ball Valve Stainless Steel£15.60 £13.00 -
![]()
IN STOCKStainless Steel 1/2" Bsp Parrel Nipple 2" long£4.80 £4.00 -
![]()
IN STOCKStainless Steel Coupler 1/2"£2.04 £1.70 -
![]()
IN STOCKStainless Steel Tap Kit£28.32 £23.60 -
![]()
IN STOCKWeldless Bulkhead with Compression 3/8"£7.32 £6.10 -
![]()
IN STOCKWeldless Bulkhead with Compression 1/2"£7.56 £6.30 -
![]()
IN STOCKThermowell 140mm Stainless Steel£7.44 £6.20 -
![]()
IN STOCKBall Valve with 3/8" Barb and rear thread£10.80 £9.00 -
![]()
IN STOCK4 Way Gas Manifold with 5/16 Inch Barb£24.00 £20.00
Ball Valves and Taps
Ball valves are another essential component of home brewing. These valves are used to control the flow of liquids in the brewing process. They can be used to regulate the amount of wort that flows from the mash tun to the kettle, or to control the flow of beer from the keg. Ball valves are durable and easy to clean, which makes them ideal for home brewing.